Flsun Sr Reddit

Flsun Sr Reddit. Flsun super racer firmware issue. I tried printing simple things and it went great (using the free 200g pla). It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. Im a complete beginner on 3d printing, i acquired the super racer printer. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues.

Coolste Test Of The Flsun Qq S Pro A Very Fast Delta 3d Printer 3d Serial Testeur

I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. These printers usually don't have the largest work surface, but they can offer a higher print height. I installed the udisk version to work with the pi, and tried doing a. Im a complete beginner on 3d printing, i acquired the super racer printer.

Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.

I installed the udisk version to work with the pi, and tried doing a. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. Hey there, first time 3d printer here. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.

I returned to the stock firmware, and the extruder motor works fine, so it. Flsun super racer firmware issue. Hey there, first time 3d printer here.. Hey there, first time 3d printer here.

Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.. . It's also worth noting that the flsun super racer uses 10mm belts.

It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. I tried printing simple things and it went great (using the free 200g pla). With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped.

I returned to the stock firmware, and the extruder motor works fine, so it. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. It's also worth noting that the flsun super racer uses 10mm belts. I also would recommend printing pla at about 15 … I tried printing simple things and it went great (using the free 200g pla). These printers usually don't have the largest work surface, but they can offer a higher print height. Fast delta 3d printer 1. I returned to the stock firmware, and the extruder motor works fine, so it. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.

I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean... I also would recommend printing pla at about 15 … These printers usually don't have the largest work surface, but they can offer a higher print height. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. Fast delta 3d printer 1. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range... Hey there, first time 3d printer here.

They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future... I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean.. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade.

I tried printing simple things and it went great (using the free 200g pla). These printers usually don't have the largest work surface, but they can offer a higher print height. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. I also would recommend printing pla at about 15 … I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. Im a complete beginner on 3d printing, i acquired the super racer printer.. Flsun super racer firmware issue.

I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. . Im a complete beginner on 3d printing, i acquired the super racer printer.

I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. Hey there, first time 3d printer here. I tried printing simple things and it went great (using the free 200g pla). Fast delta 3d printer 1.. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range.

Im a complete beginner on 3d printing, i acquired the super racer printer... I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. Flsun super racer firmware issue. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. It's also worth noting that the flsun super racer uses 10mm belts. Hey there, first time 3d printer here. I tried printing simple things and it went great (using the free 200g pla). I returned to the stock firmware, and the extruder motor works fine, so it. Im a complete beginner on 3d printing, i acquired the super racer printer. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues.

I installed the udisk version to work with the pi, and tried doing a. Im a complete beginner on 3d printing, i acquired the super racer printer. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. I tried switching to an esun glass pla like this one: Flsun super racer firmware issue. Fast delta 3d printer 1. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. I tried printing simple things and it went great (using the free 200g pla).. Flsun super racer firmware issue.

With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range.. I also would recommend printing pla at about 15 … Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3.. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again.

Fast delta 3d printer 1. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. I returned to the stock firmware, and the extruder motor works fine, so it. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. I installed the udisk version to work with the pi, and tried doing a... I installed the udisk version to work with the pi, and tried doing a.

Hey there, first time 3d printer here. I tried printing simple things and it went great (using the free 200g pla).. Hey there, first time 3d printer here.

Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! Hey there, first time 3d printer here... Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things!

It's also worth noting that the flsun super racer uses 10mm belts. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. Fast delta 3d printer 1. I tried printing simple things and it went great (using the free 200g pla). It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. I tried switching to an esun glass pla like this one: It's also worth noting that the flsun super racer uses 10mm belts.. It's also worth noting that the flsun super racer uses 10mm belts.

Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3... I returned to the stock firmware, and the extruder motor works fine, so it. It's also worth noting that the flsun super racer uses 10mm belts. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. These printers usually don't have the largest work surface, but they can offer a higher print height. Fast delta 3d printer 1. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range.

It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. I tried switching to an esun glass pla like this one:.. These printers usually don't have the largest work surface, but they can offer a higher print height.

I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean... .. Flsun super racer firmware issue.

Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. I tried printing simple things and it went great (using the free 200g pla). It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. Fast delta 3d printer 1. I installed the udisk version to work with the pi, and tried doing a. It's also worth noting that the flsun super racer uses 10mm belts... Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3.

Hey there, first time 3d printer here.. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3. These printers usually don't have the largest work surface, but they can offer a higher print height. Flsun super racer firmware issue. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. Hey there, first time 3d printer here. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues.. Fast delta 3d printer 1.

I also would recommend printing pla at about 15 … I also would recommend printing pla at about 15 … It's also worth noting that the flsun super racer uses 10mm belts. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. I tried switching to an esun glass pla like this one: I returned to the stock firmware, and the extruder motor works fine, so it... It's also worth noting that the flsun super racer uses 10mm belts.

It's also worth noting that the flsun super racer uses 10mm belts. I installed the udisk version to work with the pi, and tried doing a. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade.

Fast delta 3d printer 1. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. Hey there, first time 3d printer here. Fast delta 3d printer 1... I returned to the stock firmware, and the extruder motor works fine, so it.

There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! I also would recommend printing pla at about 15 … Fast delta 3d printer 1.

Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3.. Flsun super racer firmware issue. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. I installed the udisk version to work with the pi, and tried doing a. These printers usually don't have the largest work surface, but they can offer a higher print height. Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. I tried switching to an esun glass pla like this one: It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. It's also worth noting that the flsun super racer uses 10mm belts.. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range.

It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues.. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things!

I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. Fast delta 3d printer 1. I returned to the stock firmware, and the extruder motor works fine, so it. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. I tried printing simple things and it went great (using the free 200g pla).. Hey there, first time 3d printer here.

I installed the udisk version to work with the pi, and tried doing a. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. Hey there, first time 3d printer here. I installed the udisk version to work with the pi, and tried doing a. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. I tried printing simple things and it went great (using the free 200g pla).

I returned to the stock firmware, and the extruder motor works fine, so it. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. These printers usually don't have the largest work surface, but they can offer a higher print height. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. I returned to the stock firmware, and the extruder motor works fine, so it. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped.

I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.

Fast delta 3d printer 1.. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. These printers usually don't have the largest work surface, but they can offer a higher print height. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. I returned to the stock firmware, and the extruder motor works fine, so it.

They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. Im a complete beginner on 3d printing, i acquired the super racer printer. I returned to the stock firmware, and the extruder motor works fine, so it. I installed the udisk version to work with the pi, and tried doing a. Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. Fast delta 3d printer 1. These printers usually don't have the largest work surface, but they can offer a higher print height. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things!

Flsun super racer firmware issue... I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. These printers usually don't have the largest work surface, but they can offer a higher print height. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. I returned to the stock firmware, and the extruder motor works fine, so it. I tried switching to an esun glass pla like this one: There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again.

I tried printing simple things and it went great (using the free 200g pla). Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. Hey there, first time 3d printer here. Im a complete beginner on 3d printing, i acquired the super racer printer. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. I returned to the stock firmware, and the extruder motor works fine, so it. I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade. It's also worth noting that the flsun super racer uses 10mm belts. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again.

I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. I returned to the stock firmware, and the extruder motor works fine, so it.. It's also worth noting that the flsun super racer uses 10mm belts.

These printers usually don't have the largest work surface, but they can offer a higher print height. I returned to the stock firmware, and the extruder motor works fine, so it. Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3.. Hey there, first time 3d printer here.

Fast delta 3d printer 1. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! Hey there, first time 3d printer here. It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped... I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean.

I also would recommend printing pla at about 15 … With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. Im a complete beginner on 3d printing, i acquired the super racer printer. Fast delta 3d printer 1. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. There was no skipping or grinding, it just stopped completely, and no attempts to move it with or without the nozzle heated got it going again.

Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.. Fast delta 3d printer 1. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues.. I tried switching to an esun glass pla like this one:

I also would recommend printing pla at about 15 … I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. I tried switching to an esun glass pla like this one: Flsun super racer firmware issue. I returned to the stock firmware, and the extruder motor works fine, so it. I tried printing simple things and it went great (using the free 200g pla).

It seemed to install fine, but when i started a test print, the extruder motor ran for about 30 seconds, and then just stopped. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. I tweaked my slicer (as the profile provided for it is kinda crap) to get it to actually print at a steady 150mm/s, except i left in a slowdown to 80 on the outer walls to keep them clean. Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3. Im a complete beginner on 3d printing, i acquired the super racer printer. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. Fast delta 3d printer 1. These printers usually don't have the largest work surface, but they can offer a higher print height. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things!. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range.

Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire.. I've used some of the sample filament that came with the printer as well as some esun silk plas without any issues. These printers usually don't have the largest work surface, but they can offer a higher print height... I am sure we'll have a dual 5015 fan mount soon which works with the sherpa mini, so i'll update the article when i do that upgrade.

Im a complete beginner on 3d printing, i acquired the super racer printer. Just got my flsun sr a couple of days ago and have been having a blast printing off benchys and a few other little things! I installed the udisk version to work with the pi, and tried doing a. With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range. I also would recommend printing pla at about 15 … With a diameter of 260 x 330 mm, it offers quite a large volume considering its mechanical location and price range.

Made sense to me, so i went to flsun's website and grabbed the sr firmware v1.3. Hi everyone, was tinkering on setting up octoprint on my new sr and noticed it had the warning that my firmware was out of date and to update it to prevent fire. I returned to the stock firmware, and the extruder motor works fine, so it. Hey there, first time 3d printer here. They are not gates belts like we get with the ender 6, but they seem to be good enough.these belts will help with fast movements during printing, and i really hope more 3d printers will use wider belts in the future. Im a complete beginner on 3d printing, i acquired the super racer printer.. Hey there, first time 3d printer here.